Home residential lighting installation skills

L, residential lighting should use with incandescent lamps, light rare earth based energy-saving fluorescent lamp. 2, residential lighting design should make indoor light environment practical and comfortable. Bedroom and dining room should use low color temperature light source. 3, the living room lighting should consider the use of multi-functional requirements, such as the establishment of general lighting, decorative lighting, floor lamps, etc., sometimes in the living room set dimmer devices to meet the needs of different functions. 4, the local restaurant lighting to use hanging lamps, in order to highlight the effect of the table for the purpose, but also set the general lighting, so that the whole room has a certain degree of brightness, showing a sense of cleanliness. 5, the kitchen lamps should be easy to clean the type, such as glass or enamel products with lamp shade, and should be consistent with the restaurant or the use of the color of the light source. 6, entry into the room to give people the first impression of the place, so bright, lamps placed in the position to consider the junction depth the room door and, it can avoid the emergence of faces in the shadow of the interviewer. 7, in the lobby of the cabinet or wall lamp, will make a sense of spacious hall. 8, the corridor lighting should be placed in the room entrances and exits, the closet, especially the start and direction of the stairs. Set the ceiling to make the lighting from the ground above 1.9M. Stair lighting should be bright, avoid danger. , 9 bathrooms need the bright light, because the bathroom lighting switch frequently, so the choice of incandescent lamp to light more appropriate. 10, the bathroom lamp position should be installed in the toilet or bath above and behind. As for the seesaw switch should is arranged outside the bathroom, otherwise should use waterproof type panel or the use of insulating rope pull switch operation. 11, the toilet lighting fixtures should be installed in front of the toilet. 12, can be divided into residential (apartment) unit cloth lamp and power socket set, should adapt to the light wall when the separation of any change. The utility model is characterized in that the utility model is characterized in that a hanging type socket is arranged on the ceiling, and the utility model is characterized in that the utility model is characterized in that the utility model is characterized in that the utility model is characterized in that the utility model is characterized in that the utility model is characterized in that the utility model is characterized in that the utility model is characterized in that the utility model is characterized in that the utility model adopts a. 13, senior residential (apartments) in the lobby, channel and bathroom, should be used with seesaw switch indicator. 14, in order to guard against and equipped with a monitor, its function should be connected with the unit inside the lights and alarm. 15, the apartment staircase lights should be combined with the floor display, public lighting can be centralized control in the management room. High rise residential staircase lights, such as the use of timing switches, the flow of energy should be limited and in the case of forced conversion of high incidence of accidents. General lighting and socket 16, within the household should be separated from the line, and in every branch loop except should be equipped with overload and short circuit protection, and should be installed leakage protection socket loop and a protection device, undervoltage protection function. 17, single dormitory lighting source should choose fluorescent lamp, and should be perpendicular to the window cloth lamp. Each socket shall not be less than 2 groups. When conditions permit, the use of electric appliances can be controlled to control the electricity load of each room or other measures. In public activity room should also be equipped with a socket.