RECOM release RCD-24-0.35 constant current LED driver

RECOM International Power GmbH RCD-24-0.35 LED released before the current internal drive, low power consumption, full load can work at +85 DEG C under ambient temperature conditions. The structure of this architecture can achieve little in the 22.1 x 12.6 x 8.5mm size in case. At present, PCB has been started to provide a RECOM version of the through-hole bonding and floating conductor, while the surface adhesion version is being developed.

RCD driver DC input voltage is 4.5 ~ 36V, 1.2 ~ 35V output voltage, output current (350mA 500mA and 700mA Development), the output current accuracy of 2% typical, ripple / noise less than 120Vpp, and the dimming function 0 to 100%. RCD drive products are easy to use, do not need to set or adjust, and comply with EMC, EMI and component safety standards without any external components. This converter is made of UL-94V0 material and meets fire safety requirements.

If you want to work in the best operating condition to produce light and color, multiple high brightness LED should be according to different types, driven by the current power supply 350mA, 500mA or 700mA, the constant current module may be included in the LED light bulb or individually as he will be able to mount, as traditional lighting devices like installation or change repair.

RECOM LED drive DC power supply suitable for diversified applications, such as forklifts, traffic signal lights, aircraft, railway - internal lighting, dangerous environment, bus and other transportation and industrial use. This module has 1 switches to control the pin, through this pin, the converter can be discharged, but also through the pulse width modulation (PWM) signal to 10Hz to 1000Hz frequency between the dimming. RECOM also launched the "Ready-to-Go" solution that can be installed without external components.

Source: International Electronic Business