LED panel lights into an embarrassing situation no product structure advantage

When at LED Street encounter bottlenecks in the development of the LED lighting, more and more enterprises start to LED indoor lighting field. LED panel lights also suffered similar to the same situation as LED fluorescent lamp, the brand mixed, quality is difficult to identify, the price gap between high and low and other factors, so that the industry began to fall into the product crisis of confidence.

LED panel lamp product advantage is not fully reflected

The advantages of LED panel light is the most important change point light source with glare glare of the surface light source, uniform light, soft and bright, no glare lighting effect. However, the LED panel lamp production enterprises almost nearly half of the products are the "light" luminous effect do one-sided understanding, mainly in the following phenomena: first, adding an acrylic panel called LED panel lights, LED grille lamp plate on the course, improved product inspired daylight lamp tray which is clean from the traditional grille to. Ultra thin LED panel blind pursuit. Another type of structure two, LED panel light is advertising purposes from the side light light guide lamp evolved, characterized by the use of the LED compared to a fluorescent tube or CCFL tube thinner and lighter, the product structure can be very thin.

Another type of structure LED panel light is advertising purposes from the side light light guide lamp evolved, characterized by the use of the LED compared to a fluorescent tube or CCFL tube thinner and lighter, the product structure can be very thin. Throughout the course of development of LED panel light, most of the enterprises are as a starting point, one of the Hong Kong listed companies from 2005 to invest considerable advertising, apparently LED panel light was more and more industry concern. The idea that the LED panel lamp industry should not be ultra-thin LED panel lights blindly sought after. First of all, the structure of the LED light is reflected and refracted from the side surface of the light guide plate through the guide plate and the reflecting plate, reflecting outlets under the light at the front, while solving the glare problem, but its light efficiency will be in each path the conduction of light will have a corresponding degree of loss, therefore, the LED panel lights appear so many years sales did not think so much, I think the main reason is good is not good, the price is high not to say, the actual illumination is not enough. In addition, some customers because of the blind pursuit of the ultra-thin LED panel light, intended to replace the traditional office ceiling grille lamp with its various advantages, but did not think the ceiling has enough space, which not only can not reflect the characteristics of ultra-thin, low extraction efficiency of the light effect is worse than traditional fluorescent lamp lamp illumination, all will affect the evaluation of the LED lighting industry end users.

Exaggerated LED energy-saving effect, but a crisis of confidence

The fluorescent lamp grille lamp LED to replace the traditional lamp panel is a good choice, it is not affected by the traditional fluorescent lamp specifications can be used not only the length of the straight side structure described above and under the light guide structure, can also according to the designers into the building and furniture exhibition. However, many of today's LED lighting companies to quickly open the market, blindly exaggerated the energy efficiency of LED lighting.

LED lighting industry a few years ago the hot, LED lighting can save energy 80% that cannot be used as a reference LED indoor lighting. The large-scale LED application before the holiday lighting, stage lighting, city landscape lighting and LED decorative lighting is mainly reflected in the LED rich colors, can realize the change of design and effect of various kinds, because of the application of LED products has no strict requirement of the brightness, so we can use relatively little power of LED can be achieved. Compared LED decorative lighting, LED lighting in most cases without the use of its convenience can be programmed to control the color change, but the use of LED lighting products Static, so the light design, LED lighting products with brightness design, light angle and so can refer to traditional lighting industry standards, to achieve brightness with the traditional lighting, LED lighting products under current technology can not do such 80%. Therefore, the promotion of the blind and exaggerated its energy efficiency, will allow the end user, especially lighting designers on the LED lighting companies do not trust, further on the LED lighting products do not trust.