With the development of energy-efficient lighting, and gradually replace the incandescent bulbs and fluorescent lamp LED, the popularity of the shape of the free OLED increasingly anticipated. The use of the necessary amount of LED, the use of OLED to enable all surfaces to be directly lit, and so on, is a growing possibility for a variety of uses.
From the point of view of energy saving, the use of incandescent bulbs as the main lighting and production in the past less and less. In Japan, the Ministry of environmental protection and the Ministry of economy and industry have asked related industries to stop production and sale of incandescent bulbs by 2012, the major enterprises have complied with this requirement.
As an alternative light source, LED (Light Emitting Diode:LED) technology to achieve rapid development. Because of the high luminous efficiency, LED as a new generation of lighting has become a trump card to save energy, from the time of high cost has been actively adopted. As prices continue to decline, LED will undoubtedly become the mainstream of the future light.
Not only Japan, LED in the global development is also accelerating. In South Korea, for example, the country is planning to make up 30% of all lighting by LED by 2015. Countries such as the United States and China are also promoting LED lighting related investments.
As the next stage, the trend of LED lighting instead of straight tube fluorescent lamp has been obvious under the condition of invariable style. Most lighting companies are currently developing and selling products to replace straight tube fluorescent lamps.
LED lighting is important for the purpose of energy saving at the same time, can also be limited to replace the original light source effect. The potential to change the way people live and work together.
This is mainly due to the use of LED to achieve a high degree of freedom of light and color adjustment lighting.
For example, LED lighting theory can be achieved in 0 to 100% of the fluorescent lamp is difficult to achieve full range dimming. Although the fluorescent lamp also has the support light modulation product, but has not been able to start from the 0% random control type.
Moreover, the presence of fluorescent lamps with low light intensity will shorten the luminous life of the problem. It takes a few minutes to stabilize light after lighting up. The LED lighting to light the light but can extend the life of the light, the response is also relatively high light.
Provide the necessary light for the necessary premises
In the past, the more bright the better the concept of lighting. Therefore, according to the situation to adjust the brightness, adjust the atmosphere, including color, etc., residential, office, the city rarely use these features of the case. The use of these features is generally only commercial facilities.
Under the influence of the East Japan earthquake in March 2011, the idea began to change. This is because the reality makes it necessary for people to drastically adjust the traditional way of living like water. Even now, in eastern Japan, residential, office, the city is still maintained in all corners of the state of a significant reduction in the amount of light. Out of these experiences, "no need to shine" has also been expanded.
In order to cope with the transformation of this concept, LED is the best light source. Because the LED can simply use the necessary lighting and adjust the color temperature where necessary.
In order to support the progress of LED lighting, the combination of sensors and automatic dimming is an effective means. This requires the connection of LED lighting and sensor communication systems, as well as its control, management of the terminal group, such as a variety of peripheral technologies and products. To improve the level of integration is difficult to achieve with the original lighting companies, and communications equipment manufacturers and construction companies and other enterprises to cooperate.
OLED fundamentally changes the lighting patterns
As with LED, which helps to save energy and achieve a higher degree of freedom of light than LED, OLED (ELectro-Luminescence) is highly anticipated. OLED has not yet fully put into practice, the subject is quite a lot. However, on the OLED, hidden to subvert the traditional concept of lighting innovation.
The greatest feature of its unprecedented is the light source for its own surface luminescence. Existing lighting, including LED lighting is the use of point and line light source to illuminate the space. In the face of the need to shine, has been a number of point light source, line light source together, outside the cover of the shape of the lampshade. And the use of OLED can directly achieve the whole face lighting, can produce a wide range of uniform lighting of the best appliances.
The thickness of the light emitting part is basically the same as that of the glass and plastic as substrate. Very thin, and very coordinated with the surface of the interior. To illuminate the entire ceiling, or cover the walls, windows, tables, chairs and other furniture, electrical appliances, the surface directly as the lighting. In other words, lighting looks like a "paste" rather than "install"".
In addition, in addition to be able to effectively apply to cars, aircraft and other places outside the space is limited, the poster can be posted as a sign lighting is also expected to be achieved. With the designer's new ideas, there may be unexpected lighting in the future.
Contact: mack
Phone: 13332979793
E-mail: mack@archled.net
Add: 3rd Floor, Building A, Mingjinhai Second Industrial Zone, Shiyan Street, Baoan, Shenzhen,Guangdong,China