Guangzhou sampling LED lighting accessories Schneider, OPPLE into the black list

According to the Beijing News reported that in May 4th, the Guangzhou Municipal Administration for Industry and Commerce in the field of Guangzhou sales of plug and socket products were quality checks. A total of 44 samples were selected from the production of the production of the sample of the company, after the inspection of the 27 samples were judged as the overall failure of the supervision, the failure rate was 32.14% (). The extraction plug 15, without passing the inspection of paragraph 8, the unqualified rate was 53.33%; extraction socket 56, without passing the inspection of paragraph 12, the unqualified rate was 21.43%; extraction converter 13, without passing the inspection section 7, a failure rate of 53.85%.

Many well-known brand products are not qualified

According to reports, the sampling of the "product quality supervision and sampling procedures with prior quality information situation" (GB/T 28863-2012) standard, for wire and cable size inspection, marking, and heat insulation material is very resistant to heat fire and tracking resistance and other performance indexes were detected.

Sampling results, produced by Guangdong Schneider Electrical Appliance Co. Ltd., the nominal trademark for "Snaider" - a multi-function socket, two or three pole socket, single multi socket three products, the size check project failed; nominal by OPPLE lighting (Zhongshan) Limited production, OPPLE trademark for "OPPLE single switch four bit converter" heat "project was seized substandard.

The main problems of size inspection are the bolt size does not meet the standard requirements, the two poles with grounding plug type, parameters, dimensions do not meet the standard requirements. Bolt size does not meet the standard requirements, so that the plug can not plug and socket, use when the plug is loose, bad contact risk; heat failure will lead to the use of products may live parts exposed deformation, and other phenomena, seriously endangering the safety of users.

Inspection report should be checked when purchasing

In addition to the "size check" and "heat", "symbol" and "grounding measures" and "soft cable and connection, plug and mobile socket structure" and "insulation resistance of normal heat, flame resistance and resistance to tracking and other projects in the sample sampling was also detected a problem. These problems can lead to poor contact, parts fall off or damage, resulting in electric shock, fire and other hazards, easy to cause personal injury and loss of property.

Guangzhou city Industrial and Commercial Bureau to remind consumers to buy plug and socket, converter products and other products, the Sellers shall provide the inspection report of quality inspection departments, quality or lack of basis, the purchase should check the plug and socket, converter logo, product should be marked with the name of the enterprise, specifications, rated voltage, rated the current value, power supply and related warning signs.

According to the use of electrical power to select the corresponding matching products. When buying hands try, plug into the socket should be good contact, no loose feeling, and can be pulled out without too much trouble, but also to check the protective door, if the gap is too large to protect the middle of the door, can not really protect the use of people.

For more information about LED, please click on China LED network or pay attention to WeChat public account (cnledw2013).