According to voice of the economy reported yesterday is the world standard day, the National Standards Commission, the Ministry and other departments jointly issued the 33 national standards, which is closely related with people's health and safety and environmental protection "with tungsten halogen lamps for general lighting energy efficiency limit value evaluation and value of energy saving", and "evaluation" radiation on the human body electromagnetic lighting equipment of the two criteria of concern.
Electrical lighting National Standardization Technical Committee investigation -- Dan chief engineer told reporters that the release of the "halogen lamp for general lighting energy efficiency limit evaluation value and value of energy saving" is one of the important achievements of 100 project to promote energy efficiency standards. In order to save lighting electricity, China in October 1, 2012 began the implementation of the elimination of incandescent road map, through the implementation of the roadmap for 5 years, the 15W will be gradually phased out of the Chinese market. If the use of energy-saving halogen tungsten lamp to replace 50% of the incandescent lamp, the country can save electricity 400 million degrees, energy saving effect is obvious. The introduction of the national standard for the evaluation of electromagnetic radiation on the human body, not only for the enterprise to judge whether the product meets the safety requirements, but also provides a reference for the public to correctly understand the lighting equipment.
Check Yue Dan told reporters that the action programme for the development of low-carbon energy saving and emission reduction of the State Council from 2014 to 2015, clear requirements for the implementation of 100 and lucid standards to promote the project, formulated a series of important standards, general lighting, halogen lamp, the effect of set value, and put forward the energy saving evaluation is under the background of. If the implementation of the standard, will enable enterprises to produce a significant increase in energy efficiency. But in the process of the implementation of the standards, incandescent lamp production enterprises, will face a great challenge, must carry out technological transformation, lighting equipment in the lives of people everywhere, how to evaluate this kind of equipment to produce electromagnetic radiation on the human body, it is the common concern of the public and business issues.
He said that in 2012, once the media reported that energy-saving lamps radiation caused by large reverse, also caused the industry of lighting products for radiation research and discussion topics, it is in this context, to formulate the standard. The significance of the implementation of this standard is to facilitate the enterprise to evaluate and determine whether the product meets the requirements of electromagnetic radiation, to help the public to understand and correctly determine the electromagnetic radiation generated by lighting equipment. The standard method of measurement, and the measurement of the compatible values are clearly analyzed. The implementation of this standard, not only for the enterprise to provide the assessment of lighting appliances, electromagnetic radiation safety and quality tools, but also for the public to understand the correct lighting provides a reference.
What is the impact of these two standards on the capital market?
Orient Securities investment adviser in Shenyang believes that this shows that China's incandescent lamp in the pace of increase, will benefit the LED lighting industry, compared to energy-saving lamp, LED lamp without radiation, compared with tungsten halogen lamp, LED lamp application environment is more broad, because the tungsten halogen lamp in some dust, flammable, explosive, corrosive environment can not be used.
Shenyang said that the lighting equipment for the evaluation of the electromagnetic radiation of the human body, halogen tungsten lamp standards for the entire capital market, there is a greater significance. Now the world is set off a wave of elimination of incandescent light, and the first generation of incandescent light source, can replace many varieties, energy-saving lamps is a. The energy-saving lamp market is already a chaos, because in the production of energy-saving lamps, compatible with a forced national standard only for electromagnetic, energy-saving lamps can wantonly radiation problems had been a blind spot. After the standard has been determined, the detection mechanism can limit the energy consumption of the energy-saving lamp. However, in any case, there will still be a small amount of energy-saving lamp radiation, which is more obvious compared with the LED lamp, LED light quality is relatively good, and basically no radiation.
According to the China Association of lighting survey data show that China's current use of energy-saving lamps have 100 million households, the total market value of a single energy-saving lamps in more than 12 billion. So this standard for the entire LED industry will usher in a more obvious boost. In addition, halogen tungsten lamp has many advantages, including high luminous efficiency, long life and other characteristics, but these features show that it has the trend to replace incandescent lamps. Halogen lamp is the biggest drawback is that it has the use of regional restrictions, because it is relatively high operating temperature, not suitable for explosive, hazardous, corrosive and other dangerous places. In this case, tungsten halogen lamps and LED lights to make a comparison, 1W LED is equivalent to 8W tungsten halogen lamp, LED lamp and the use of life is generally 30 thousand hours, while the halogen lamp only thousands of hours, so the LED lamp has obvious advantages. So now the implementation of the corresponding standards, indicating that the pace of elimination of incandescent light in the gradual acceleration, and halogen tungsten lamp and LED lamps in the price and the scope of use can be carried out to complement each other, and there will be no confrontation. Taking into account the current LED accounted for only 1% of the global number of lamps, can enhance the space is relatively large.
For more information about LED, please click on China LED network or pay attention to WeChat public account (cnledw2013).
Contact: mack
Phone: 13332979793
E-mail: mack@archled.net
Add: 3rd Floor, Building A, Mingjinhai Second Industrial Zone, Shiyan Street, Baoan, Shenzhen,Guangdong,China