The next LED bulb replacement market growth rate of over 100% CAGR

According to the latest analysis report of market research company StrategiesUnlimited, despite the 2009 LED bulb replacement market is still very small, but now it has become the most rapidly growing market in the next 4 years, CAGR (CAGR) will reach 104.2%, LED lamp replacement revenue for the first time more than LED building decorative lighting market revenue in 2011. In addition to these two markets, from 2010 to 2014, residential LED lighting market will continue to grow, CAGR will reach 71.8%. During this period, retail display, off the grid and outdoor LED lighting applications market growth rate is expected to exceed 40%.

The general manager of OSRAM solid state lighting division, Dr. MarkusKlein said: "the growth power LED bulb replacement market, mainly from the implementation of the global lighting efficiency. "

With global incandescent disable regulations have been implemented, the existing incandescent lamps have been replaced with CFL or LED energy-saving lamp bulb. Because of the current problems of LED chip cost is also high and the heat has not yet been fully resolved, so CFL energy-saving lamps in the next 5 years, there is still much room for market growth, but with lower manufacturing cost of LED chip and CFL energy-saving lamp still exists the problem of environmental pollution, so after 5 years, LED lighting will gradually become the mainstream market demand the. At present, LED lighting alternative market mainly includes: home, office and shop in the spotlight, fluorescent lamp, lamp, lamp and shelf operation lamp.

Efficiency of the current LED lighting is generally only 70-85%, to improve the efficiency, there are only two ways, one is to improve the light efficiency of LED chip, LED chip two is increasing beam angle. OSRAM has recently launched the industry's first with a new 150 degree beam angle OSLONSSL150, wide beam angle characteristics for reducing the loss of light reflecting system, which means that the LED lamp OSLONSSL150 design can become more efficient and simple. Dr. MarkusKlein pointed out: "the current industry LED chip beam angle is usually only 120 degrees. "

Light distribution new OSLONSSL150 uniform, which allows designers to better manage the external reflector of light, especially handy in the design of LED bulb and lamp at. In addition, the small size of the OSLONSSL150, can simplify the design of lamps and lanterns, easy to achieve miniaturization design.

Dr MarkusKlein said: "the new OSLONSSL150 has the miniaturization design, compact shape, so even densely arranged together does not have the shadow effect. For example, the lamp efficiency can be increased by more than 5%. The reflector can also be miniaturized, and the installation depth of the lamp itself is also relatively shallow. With these features, the LED provides a flexible design option for high-performance lighting solutions. "

OSLONSSL150 is also an excellent source of other applications, such as hanging from the ceiling of the diffuse lighting and lighting backlight has no obvious spot area. In addition, the simulation of the incandescent lamp and halogen lamp LED bulb / modified light diffuser can also be used to provide uniform light. Also, color mixing is simpler than ever. If you use a set of different colors of OSLONSSLLED, you can achieve the effect of the reflector layer color mixing, which is much simpler than the realization of color mixing through the auxiliary lens.

From the technical data, the new LED is quite good. The LED to 1 mm2 chip based on the 350mA operating current can produce a typical brightness of 92 lumens (LM), color temperature is 3000K; in the 700mA operating current can produce 156lm brightness. It provides all white color (2700-6500K) and different color versions. OSLONSSL150 is a new member of the OSLONSSL product family (the beam angle of the other products in the series is 80 degrees), and the overall dimensions of the 3mm * 3mm are fully consistent with the characteristics of the product portfolio.

80 degree beam angle of LED mainly for the spotlight, downlight and MR16 lights, it makes no reflector can achieve the best effect of condenser. According to the specific application and specific requirements, 80 degrees and 150 degrees version of the LED provides customized solutions, you can achieve maximum system efficiency.

Dr. MarkusKlein said: "the blue Bert type angle beam is still the standard, but it is not ideal for the majority of lighting design. In most cases, OSLONSSL80 or 150 is better than the blue Bert angle, and can enhance system performance, and are very consistent with the typical concept of lamp design. The thermal resistance of these two LED is also very low, only 7K/W, so it can be densely assembled. In short, the 80 degree and 150 degree beam angle is the best choice for a variety of applications. "

According to the latest analysis report of market research company StrategiesUnlimited, despite the 2009 LED bulb replacement market is still very small, but now it has become the most rapidly growing market in the next 4 years, CAGR (CAGR) will reach 104.2%, LED lamp replacement revenue for the first time more than LED building decorative lighting market revenue in 2011. In addition to these two markets, from 2010 to 2014, residential LED lighting market will continue to grow, CAGR will reach 71.8%. During this period, retail display, off the grid and outdoor LED lighting applications market growth rate is expected to exceed 40%.

OSRAM solid state lighting division

General manager MarkusKlein

Dr.

The general manager of OSRAM solid state lighting division, Dr. MarkusKlein said: "the growth power LED bulb replacement market, mainly from the implementation of the global lighting efficiency. "

With global incandescent disable regulations.