Product Maintenance

National Semiconductor Alliance released the latest lighting test report analysis

A description of the test.

Sixth rounds of data released by the national electric light source quality supervision and Inspection Center (Shanghai) test, are measured results. Test standard based on GB/T 9468-2008 "General requirements for photometric distribution of lamps and lanterns" and GB/T 7002-2008 "photometric test for light emitting lamps". Refer to GB/T 10682-2002 "double end fluorescent lamp performance requirements", GB/T 7922-2003 "lighting source color measurement method", IEC 1167:1992+A1:1995+A2:1997+A3:1998 "metal halide lamp".

Two.Led outdoor lamp test results

Disclaimer: the above test data is only responsible for the test sample, does not represent the entire quality of the products and qualified; without permission shall not be reproduced or used for other purposes.

Table for table 1 Figure

Three.LED indoor lighting test results

Table 2

Disclaimer: the above test data is only responsible for the test sample, does not represent the entire quality of the products and qualified; without permission shall not be reproduced or used for other purposes.

The following table is shown in Table 2

Four.LED wash wall lamp

Disclaimer: the above test data is only responsible for the test sample, does not represent the entire quality of the products and qualified; without permission shall not be reproduced or used for other purposes.

Scan the qr codeclose
the qr code