LED light export in case of blocking new lighting and overweight

In recent years, the rapid development of China's lighting industry, the rapid expansion of the scale of production, and become the focus of home appliances to drive the export of products. LED light source lamp as the leader of a strong rise, but also the national technical regulations and standards of target".

The regulations and standards of deterrence appear one after another,

The new regulations of the LED lighting industry, along with the barrier effect, have emerged as a strong risk factor for concealment:

First, the continued tightening of energy testing methods. The U.S. Department of energy has proposed a new energy test program for light emitting diode (LED) bulbs. The standard makes the measuring lumen output, input power and the method to determine the relative spectral distribution, correlated color temperature, including luminous flux, input power, and detection of related color temperature, rated life etc..

Two certification process is more stringent. China's National Defense Commission issued Notice No. twenty-third in 2014, the original implementation of mandatory certification rules to adjust the amendment, LED power and other products will be formally incorporated into the scope of compulsory CCC certification in September 1st this year. In addition, Chile issued a bulletin, intends to provide a voltage not exceeding 250 volts, certification procedures and safety requirements of incandescent lamp series or parallel series, LED lamp series, lamp series products and test items, according to the standard and the corresponding defect classification, and define the choice of the number of different samples and determine whether the qualified certification system on the basis of Chile, the inspection items include 12 types of testing, such as classification, labeling, structure, creepage distance and clearance, insulation resistance and electric strength etc..

Three is to enhance the threshold of compulsory inspection. The Taiwan area has been implemented from July LED lighting mandatory inspection, test items including security, performance and electromagnetic interference, without inspection is listed for sale and verified, will be fined NT $200 thousand and 2 million yuan.

Exports in case of blocking, the risk of electric shock due to the first

Only 1-7 months of this year, the EU non food consumer goods rapid alert system (RAPEX) has been 54 times to Chinese Lamps lighting products production bulletin, "in the door" are not comply with the low voltage directive (LVD), the European standard EN60598 and European standard EN14059 products. The risk of electric shock accidents continue to bear the brunt, "focuses on the following factors: one is the design defects, easy contact with live parts or high voltage part; two is the insufficient insulation, the main circuit and the secondary circuit between the creepage distance and clearance, both to guide the collision, insufficient insulation electrical components and metal conductors; the three is not equipped with a transformer to provide safety low voltage output. Other reasons for the recall include the presence of parts that are in contact with the human body, the incorrect use of the product and the confusion of the relevant product specifications or specifications.

Control risk and promote growth simultaneously, creating a new situation of exports

Even if the lamp stops heavy, the engine is still strong. Ningbo lamps illuminating the 5 continents in 157 countries, has formed an annual output of more than ten billion yuan of a complete industrial chain, ceiling lamps, wall lamp, chandelier, table lamp, floor lamp, Nightlight, lamp decorations and other products for the export of new brick in LED electric light source products. 1-7 months of this year, Ningbo port exports lamps, lighting fixtures and similar products of about $1 billion 190 million, an increase of 9.87%.

With the upgrading of the LED lighting industry, the situation of domestic and international laws and regulations is also increasing, energy efficiency indicators and ecological design has become the main theme". After entering the healthy development of the track, the technical barriers to industrial restructuring of the new requirements, the lighting industry in order to bring more bonus effect, you need to work hard in three areas:

One is to strengthen the ability of product testing. Aiming at the weak points of quality control improve self-control ability, strengthen the standard compliance review, test in strict accordance with international standards; in the quality management of good raw material, production safety and export customs inspection, which meets the requirements of energy saving and environment-friendly energy utilization of raw materials and components.

Two is to improve the technical support system. In order to enhance product innovation as the main line, focus on the development of key manufacturing technology breakthroughs in lighting, by raising the level of production equipment, optimizing product structure, increase the added value of products, improve brand awareness, enhance brand and soft power construction.

Three is highly concerned about early warning information. Referring to the sensitive issues involved in the notification recall, high risk quality and safety projects to be rectified, in order to clarify their own needs to grasp the specific product requirements and response programs to promote sustainable export growth.

For more information about LED, please click on China LED network or pay attention to WeChat public account (cnledw2013).